Installation Instructions

  1. Remove existing bulb per manufacturers service instructions

  2. Seperate adaptor ring from the NAO Led bulb if it is attached

  3. Install the unattached adaptor ring into the headlight assembly and secure in place with the light retaining clip

  4. If your headlight has a rubber cover attach it to the NAO Led bulb making sure that it does not interfere with the locking clips on the bulb

  5. Install the bulb into the adaptor ring making sure the locking tabs are inserted into the openings on the ring

  6. Turn the bulb to the right, you will feel the locking tabs lock into place

  7. Plug connector into headlight socket.

  8. attach the rubber cover to its base

Summit Powersports

Dealer sales only, no retail

© 2015 by Summit Powersports